Space Tech Expo Rohde & Schwarz and Connektica Showcase Automated RF Test Systems

Source: Press release Rohde & Schwarz, adapted by 3 min Reading Time

Related Vendors

At Space Tech Expo Europe 2026, Rohde & Schwarz and Connektica will jointly present a demonstrator of automated test systems for passive and active RF components, such as LNAs, as well as satellite payloads. Visitors can see the demonstration at Connektica’s stand D9-05 in the Occitanie Region Pavilion in Hall 5.

The R&S vector signal generator, FSW signal and spectrum analyser, and R&S NGP power supply, together with Connektica’s platform, form the demonstrator for the automated test system.(Source:  Rohde & Schwarz)
The R&S vector signal generator, FSW signal and spectrum analyser, and R&S NGP power supply, together with Connektica’s platform, form the demonstrator for the automated test system.
(Source: Rohde & Schwarz)

The demonstrator brings together the results of several projects in which Rohde & Schwarz and Connektica tested payloads and radar systems during qualification and production. It combines the R&S SMW vector signal generator, the FSW signal and spectrum analyser, and the R&S NGP power supply with Connektica’s MES platform for automated AIT. Together, the companies offer manufacturers in both the traditional space sector and New Space automated test systems covering everything from passive and active RF components to complete payloads.

The demonstration further strengthens the companies’ international partnership, which they have already showcased jointly at the Rohde & Schwarz stand in Salt Lake City. Rohde & Schwarz’s Madrid office was responsible for system integration, while Connektica’s Toulouse team configured all the software remotely. The demonstration shows how distributed engineering teams can jointly commission and operate automated test systems.

 A smooth transition from the laboratory to production

In the laboratory, engineers usually configure each test instrument individually, export measurement data from each instrument separately, and manually transfer the results into spreadsheets or report templates. Once the first working unit is complete and production ramp-up begins, industrialisation teams need complete test systems rather than individual instruments. Laboratory set-ups that are not used beyond the development phase can make the transition lengthy and risky — especially when teams lack in-house RF automation resources or are working under time pressure.

Rohde & Schwarz and Connektica are addressing this gap with a joint approach that they first presented in Munich earlier this year:

  • Collaboration from the laboratory stage: Both companies are involved from the purchase of the first test instrument, before procurement for manufacturing has taken shape.
  • Ready-made software test packages: Preconfigured test sequences, instrument drivers and report templates mean that new customers can build on a proven foundation rather than starting from scratch.
  • COTS test systems: Pre-characterised configurations speed up decision-making and provide customers with a complete solution.

Production readiness and quality from day one

The companies recommend that space manufacturers involve Rohde & Schwarz and Connektica early, even during development at low technology readiness levels (TRLs). From day one, test engineers structure their data, automate their own scripts and create modular test building blocks. As the product matures, these building blocks can be reused and assembled, like Lego bricks, into a complete AIT process. The manufacturing readiness level (MRL) therefore advances alongside the TRL, rather than only afterwards. With quality considered from the outset and traceable test data available from the earliest stages, manufacturers are also better prepared for subsequent EN 9100 compliance.

Jeremy Perrin, CEO of Connektica, explains: “Most test benches are built from scratch when a product moves from the laboratory into production. Together with Rohde & Schwarz, we help engineers structure their laboratory work as reusable test building blocks from the earliest development stages. When it is time to scale up, much of the production test process is already in place, and the quality foundations needed for EN 9100 compliance have already been laid.”

Ralph Kirchhoff, Global Business Development Manager for Space at Rohde & Schwarz, adds: “To move from prototype AIT to qualification and series production, satellite manufacturers need repeatable RF tests with shorter lead times and greater efficiency. By integrating Rohde & Schwarz test and measurement equipment into Connektica’s AIT automation at an early stage, space programmes can scale their test capacity alongside production volumes and bring qualified satellite payloads and subsystems to market more quickly.”

The demonstration will be on show from 17 to 19 November 2026 at Space Tech Expo Europe in Bremen, at Connektica’s stand D9-05 in the Occitanie Region Pavilion in Hall 5.

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy. The consent declaration relates, among other things, to the sending of editorial newsletters by email and to data matching for marketing purposes with selected advertising partners (e.g., LinkedIn, Google, Meta).

Unfold for details of your consent