Aviation DLR Commissions the MRO Real-World Laboratory in Hamburg

From Stefanie Eckardt | Translated by AI 3 min Reading Time

Related Vendors

On 16 November 2026, the German Aerospace Center opened an innovative MRO real-world laboratory in Hamburg. It is based on a retired business jet of the Cessna Citation type.

The centerpiece of the new DLR real-world laboratory in Hamburg is a technically fully operational Cessna Citation CJ business jet, which is used for research under realistic hangar conditions.(Source:  DLR photo media KP)
The centerpiece of the new DLR real-world laboratory in Hamburg is a technically fully operational Cessna Citation CJ business jet, which is used for research under realistic hangar conditions.
(Source: DLR photo media KP)

An aircraft is developed over a few years, built in just a few months—and then often remains in service for up to 30 years. To ensure that it flies safely, efficiently and in a resource-conserving manner over these decades, modern maintenance, repair and modification methods (Maintenance, Repair and Overhaul, MRO) are needed. This is exactly where the new MRO real-world laboratory of the German Aerospace Center (DLR) comes in, as Prof. Dr.-Ing. Anke Kaysser-Pyzalla, Chair of the DLR Executive Board, emphasised at the opening event: “Anyone who wants to shape tomorrow’s aviation must consider the entire life cycle of an aircraft—from development through decades of operation. Our new MRO real-world laboratory at the DLR Institute of Maintenance and Modification is a unique research platform for this. By testing data-driven maintenance, human-centered work processes and new repair methods here in Hamburg directly on an aircraft, we are enormously accelerating technology transfer. This secures Germany’s leading international position as an aviation hub.”

Full-scale demonstrator enables testing of new solutions

Germany is one of the world leaders in the field of MRO—complex work on engines, components and airframes is in demand worldwide from German service providers such as Hamburg-based Lufthansa Technik. To further expand this technological lead, the DLR is pursuing the “Design for Operation” approach: future maintenance is strategically taken into account during the development of new aircraft technologies. This vision becomes tangible in the new MRO real-world laboratory. As part of a “hangar of the future,” the full-scale demonstrator makes it possible to test new solutions under real workshop conditions. The focus is on four key research areas:

  • Data-driven maintenance planning: prediction and optimisation of maintenance requirements
  • Human-centered digital MRO shop: interaction of skilled personnel with artificial intelligence (AI) and robotic as well as visual assistance systems
  • New technologies and methods for maintenance and modification: research and validation of technologies and methods in the challenging environment of a small aircraft with limited installation space and compact system installations
  • Sustainable supply chains: resource conservation throughout the entire life cycle with resilient material cycles

Second life for a former business aircraft

So that the business jet built in 1998 could begin a second life in science after the end of its active flying career, it was extensively converted. To fit into the laboratory hangar, one wing and a horizontal stabiliser were removed. However, the control system for the flaps and ailerons was modified so that it remains fully functional. Sensor data can be read out via a special measuring door on the right-hand side—even when the cabin is pressurised for tests. The jet’s most striking feature is its visual split: while the left side of the fuselage is painted in the classic way, the right side is completely bare and untreated. This allows researchers to compare directly how different surface conditions affect testing and repair methods—especially in non-destructive materials testing.

Collaborative projects with industry partners desired

“Our real-world laboratory is the centerpiece of a total of four laboratories at the MRO Application Center,” said Prof. Gerko Wende, head of the DLR Institute of Maintenance and Modification. “It is available not only to scientists and students for research and teaching, but also specifically for cooperative projects with industry partners.” The real-world laboratory is integrated into the MRO Application Center of the DLR Institute of Maintenance and Modification. In addition to the real-world laboratory, this includes the project laboratory for robotic assistance systems, the Vision Lab for tracking and XR technologies, and the measurement laboratory. (se)

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy. The consent declaration relates, among other things, to the sending of editorial newsletters by email and to data matching for marketing purposes with selected advertising partners (e.g., LinkedIn, Google, Meta).

Unfold for details of your consent